HMMA Literature
To purchase a hard copy of any NAAMM publication, click here.
Standards
HMMA's Standards provide authoritative, unbiased information regarding the manufacture, design and use of hollow metal products. The chief objective of our standards is the promotion of careful workmanship and the use of good design practices and quality materials. The establishment of appropriate standards is helpful not only to the architect and manufacturer, but to the contractor and building owner as well.
|
Introduction to Custom Hollow Metal (HMMA 800-96)
|
|---|---|
 |
Glossary of Terms for Hollow Metal Doors and Frames
|
 |
Manufacturing of Hollow Metal Doors and Frames
|
 |
Steel Tables (HMMA 803-08)
|
 |
Recommended Selection and Usage Guide for Hollow Metal Doors and Frames (HMMA 805-10)
|
 |
Hollow Metal Doors (HMMA 810-09)
|
 |
Hollow Metal Frames (HMMA 820-08)
|
 |
Hardware Selection for Hollow Metal Doors and Frames
|
 |
Recommended Hardware Locations for Hollow Metal Doors and Frames
|
 |
Installation and Storage of Hollow Metal Doors and Frames
|
|
Tolerances and Clearances for Commercial Hollow Metal Doors and Frames (HMMA 841-07)
|
|
Fire Rated Hollow Metal Doors and Frames (HMMA 850-00)
|
Guide Specifications
These specifications have been prepared in accordance with the CSI recommended format with Part 1 - General, Part 2 - Product and Part 3 - Execution. Guide specifications are intended to be used as the basis for developing job specifications and must be edited to fit specific job requirements.
 |
Guide Specifications for Hollow Metal Doors and Frames
|
|---|---|
 |
Guide Specifications for Commercial Hollow Metal Doors and Frames
|
 |
Guide Specifications for Commercial Security Hollow Metal Doors and Frames (HMMA 862-03)
|
 |
Guide Specifications for Detention Security Hollow Metal Doors and Frames (HMMA 863-04)
|
 |
Guide Specifications for Sound Control Hollow Metal Doors and Frames
|
 |
Guide Specifications for Stainless Steel Hollow Metal Doors and Frames
|
 |
Guide Specifications for Commercial Laminated Core Hollow Metal Doors and Frames (HMMA 867-06)
|
Tech Notes
 |
Defining Undercuts (HMMA 810-TN01-03)
|
|---|---|
 |
Grouting Hollow Metal Frames (HMMA 820-TN01-03)
|
 |
Continuously Welded Frames (HMMA 820-TN02-03)
|
 |
Guidelines for Glazing Hollow Metal Transoms, Sidelights and Windows
|
 |
Painting Hollow Metal Products (HMMA 840-TN01-07)
|
 |
Maintenance of Installed Hollow Metal Products (HMMA 840-TN02-10)
|
 |
Technical Summary (HMMA 890-06)
|