|
Standards
HMMA's Standards provide authoritative and unbiased information regarding the manufacture, design and use of hollow metal products. The chief objective of our standards is the promotion of careful workmanship and the use of good design practices and quality materials. The establishment of appropriate standards is helpful to not only the architect and manufacturer, but the contractor and the building owner as well.
Introduction to Custom Hollow Metal
(HMMA 800-96)
Glossary of Terms for Hollow Metal Doors and Frames
(HMMA 801-05)
Manufacturing of Hollow Metal Doors and Frames
(HMMA 802-07)
Steel Tables
(HMMA 803-08)
Hollow Metal Doors
(HMMA 810-87)
Hollow Metal Frames
(HMMA 820-08)
Hardware Selection For Hollow Metal Doors and Frames
(HMMA 830-02)
Recommended Hardware Locations for Hollow Metal Doors and Frames
(HMMA 831-97)
Installation and Storage of Hollow Metal Doors and Frames
(HMMA 840-07)
Tolerances and Clearance for Commercial Hollow Metal Doors and Frames
(HMMA 841-07)
Fire Rated Hollow Metal Doors and Frames
(HMMA 850-00)
Back to Top
Specifications
These specifications have been prepared in accordance with the CSI recommended format with Part 1 - General, Part 2 - Product, and Part 3 - Execution. Guide specifications are intended to be used as the basis for developing job specifications and must be edited to fit specific job requirements.
Guide Specifications for Hollow Metal Doors and Frames
(HMMA 860-92)
Guide Specifications for Commercial Hollow Metal Doors and Frames
(HMMA 861-06)
Guide Specifications for Commercial Security Hollow Metal Doors and Frames
(HMMA 862-03)
Guide Specifications For Detention Security Hollow Metal Doors and Frames
(HMMA 863-04)
Guide Specifications For Sound Control Hollow Metal Doors and Frames
(HMMA 865-03)
Guide Specifications for Stainless Steel Hollow Metal Doors and Frames
(HMMA 866-01)
Guide Specifications for Commercial Laminated Core Hollow Metal Doors and Frames
(HMMA 867-06)
Back to Top
Tech Notes
Defining Undercuts
(HMMA 810-TN01-03)
Grouting Hollow Metal Frames
(HMMA 820-TN01-03)
Continuously Welded Frames
(HMMA 820-TN02-03)
Guidelines for Glazing Hollow Metal Transoms, Sidelights, and Windows
(HMMA 820-TN03-07)
Painting Hollow Metal Products
(HMMA 840 TN01-07)
Technical Summary
(HMMA 890-06)
Back to Top
To view and / or download the document click here. |